2010
MACK® Granite™ To Demonstrate Latest Generation Hybrid Technology at 2009 HTUF
GREENSBORO, NC (October 22, 2009) – A diesel-electric hybrid tractor built by Mack Trucks, Inc. for transport use by the U.S. Air Force will be on display at the Hybrid Truck Users Forum national conference in Atlanta, October 26-28. The MACK® Granite™ model, stationed at Dover AFB in Delaware since June 2009, represents the latest generation of heavy-duty hybrid technology and meets the near-zero EPA2010 emissions regulations.
The Granite model diesel-electric hybrid powertrain features an integrated starter, alternator and electric motor. The system captures energy from braking in the form of electricity, stores it in a 630-volt lithium-ion battery pack, and uses it to power the electric motor, which assists the MACK MP7 diesel engine with propulsion of the truck.
Mack’s hybrid technology demonstrates as much as a 30 percent fuel economy improvement, depending on the truck’s application. Better fuel economy translates to lower emissions of greenhouse gases, a smaller carbon footprint and less dependence on imported oil.
The Dover AFB Granite tractor exemplifies Mack’s commitment to develop diesel hybrid technology for a range of heavy-duty applications, including refuse, construction and, now, road transport. This tractor, for example, is normally coupled with a trailer to transport cargo, both on- and off-base, including regional pickup and delivery.
“The stop-start traffic on the base with hilly roads and interstates off the base offer many opportunities to recover energy, making the Mack diesel hybrid system a good fit for use at Dover,” said Bruce Hollenbeck, vice president strategic product programs for Mack Trucks, Inc.
The tractor powertrain also provides electrification, allowing it to operate as a mobile power station. The battery is equipped with electrical outlets for computers, lighting or equipment with 110 volt, 220 volt and 3-phase current available.
“The ability to generate electricity is useful in routine settings, but very important for military or disaster response operations,” said Hollenbeck.
The Granite tractor is also equipped with selective catalytic reduction (SCR) emissions control system to comply with the very stringent EPA’10 emissions limits for nitrogen oxides (NOx). SCR also delivers improved fuel economy and lower operating costs. Another plus: the Dover tractor runs on a 20 percent blend of bio-fuel, originating from vegetable oil.
“Through our relationship with the Air Force, we are refining the match between the technology and the application,” said Hollenbeck. “As we put more hybrid trucks into service with our partners, Mack further develops the technology with practical adaptations to the hybrid system and design.”
“Early adopters and industry innovators today are creating the demand for hybrid technology across applications. Mack’s leading technology and application-specific development position us to be the top resource for customers as demand for heavy-duty hybrids grows,” Hollenbeck said.
The Granite tractor will participate in a convoy to HTUF Tuesday, October 27 and will be on display during the show. It will also be available for a “Ride and Drive” event for HTUF participants. The Ride and Drive will be held Thursday, October 29 from 9:30 a.m. – 2:00 p.m. at Turner Field, 755 Hank Aaron Dr. SW, Atlanta, GA 30315-1120. Visit http://www.calstart.org/projects/hybrid-truck-users-forum.aspx for event information.
Mack Granite Diesel-Electric Hybrid Specifications
Engine
Model: MACK MP7, EPA'10 Emissions Compliant
Power: 365 hp @ 1500-1900 Peak RPM
Type: 11-Liter Diesel
Energy Storage
Lithium-Ion batteries
Total nominal voltage: 630V
Transmission
Type: 12-speed MACK Automated Manual Transmission
CAPTION 1: A MACK® Granite™ diesel-electric hybrid tractor will be on display at the Hybrid Truck Users Forum (HTUF) in Atlanta, October 26-28. The hybrid truck is designed for heavy-duty applications, meets EPA’10 emissions regulations and runs on biodiesel. It was built for the U.S. Air Force and is stationed at Dover AFB in Delaware.
Dedicated to quality, reliability, and total customer satisfaction, Mack Trucks, Inc. has provided its customers with innovative transportation solutions for more than a century. Today, Mack is one of North America’s largest producers of heavy-duty trucks, and MACK® vehicles are sold and serviced in more than 45 countries worldwide. All Mack manufacturing locations are certified to the internationally recognized ISO 9001 standard for quality and ISO 14001 standard for environmental management systems. Mack is also a proud sponsor of Share the Road, an American Trucking Associations' public information campaign aimed at enhancing the safety of our nation’s roadways.
Mack Trucks, Inc. is part of the Volvo Group, one of the world's leading manufacturers of trucks, buses and construction equipment, drive systems for marine and industrial applications, aerospace components and services, and one of the world's leading producers of heavy-diesel engines (9-16 liter). The Group also provides complete solutions for financing and service. The Volvo Group, which employs about 100,000 people, has production facilities in 19 countries and sells their products in more than 180 markets. Volvo Group sales for 2008 amounted to over $46 billion. The Volvo Group is a publicly-held company headquartered in Gothenburg, Sweden. Volvo Shares are listed on Nasdaq OMX Nordic Exchange and are traded OTC in the U.S.
